VIDEO TDR FAILURE 블루 스크린 수리

VIDEO TDR FAILURE 블루 스크린 수리 (참고용)

https://m.blog.naver.com/dongtancom/223354749249

블루 스크린, 사용 중 멈춤, 전면 USB 포트 라면 국물

 

 

블루스크린의 오류 코드(결과)는 같더래도, 원인은 다양하게 나올 수 있습니다. 해당 부분의 문제가 있을 것으로 추정하고 집중적으로 점검을 진행해 볼 수는 있지만, 오류 코드로 그 부분(부품)만의 문제로 단정하기는 어려운 경우가 더러 있습니다. 부속을 교체해 보면서 충분히 테스트하고 오류가 없는지 확인하는 과정 그리고 불량으로 추정되는 부품이 다른 시스템에도 동일한 문제가 발생되는지 검증하는 과정이 필요합니다. (부품 간의 궁합의 문제가 있는 경우에는 다른 컴퓨터에서 동일 증상 구현이 안 되는 경우도 더러 있습니다. => 검증 과정에서 오류가 사라지면, 점검이 굉장히 오래 걸릴 수도 있습니다.)

---

 

 

 

 

Blue screen, pause in use, front USB port ramen soup

 

Profile

Dongtan Computer, 17 hours ago

URL Copy Statistics

Body Other Features

​

 

Cases of computer repair that was received as a symptom of stopping

 

This computer was stocked with symptoms of stopping while playing a Go game (mouse, keyboard, sound stop at the same time). When I turned it on at the computer store, there was a symptom that the blue screen appeared as below and I couldn't even enter the desktop.

 

​

 

​

 

Blue screen stop code: VIDEO TDR FAILURE Failed content: nvlddmkm.sys

 

​

 

​

 

=> Even if the blue screen below appears, the causes of the blue screen messages can vary. So, there are many cases that don't match the text below, so just for your information, and I recommend that you test it for a long time while replacing parts of this and that. If the symptoms are not consistent and you have various defective symptoms, it may not be easy to find the cause. (The inspection is time consuming. If the symptoms continue to appear, it will be resolved relatively quickly, but if they occur once a day or once a week, it may be difficult to repair them by leaving them to the workplace. It is better for the computer user to replace the parts and repair them.)

 

 

Blue screen stop code: VIDEO TDR FAILURE Failed content: nvlddmkm.sys

 

​

 

​

 

​

 

​

 

Looking at the stability record as below, it shows that there were many cases where the computer turned off abnormally and there were a lot of hardware errors. These error/log records can be used as data to examine the symptoms of computer failure. What is defective? It is basic data that can be suspected and guessed, but it is difficult to determine which parts are defective with this record alone. I don't know well from the records, and I need to check if the symptoms (stop/blue screen) disappear while replacing the parts.

 

​

 

 

 

=> This data shows that the computer has abnormal shutdown symptoms. Given that the blue screen message and hardware error appear, I suspect there may be a problem with the graphics card.

 

​

 

​

 

​

 

​

 

​

 

After rebooting, I entered the desktop and turned on the graphics card test program. We are also checking the temperature of major parts such as CPU/VGA. If the part's temperature is abnormally high, there is a high probability that the part has failed (cause). There are cases where fever or calculation error is the cause of failure, and there are many exceptional cases where it is not.

 

 

After booting up Windows, I install a graphics card test program to accelerate the game.

 

​

 

​

 

​

 

The computer is as follows. It is an old computer. The CPU is equipped with the second generation i5 (hard disk). Now that the 14th generation CPU has been released, it is a computer with an age of well over 10 years. If it is a computer that is functioning normally, it is certain to turn around enough Go games, but it is an old computer that can cause various errors (such as poor connection) as the parts are worn out and the metal is removed.

 

 

It is a computer equipped with a CPU produced in 2012.

 

​

 

​

 

​

 

There was no problem running the graphic card test program above, so I was just going to ship it. At the end, another blue screen appears as below. This stop code is KERNEL_SECURITY_CHECK_FAILURE. The security check of the operating system failed. Because there are many blue screen messages and the same error code can have various causes, it is not easy to specify what is wrong by just looking at the blue screen message. (There are more cases where you don't know the cause even if you look at the code. If it's a code that occurs often, I guess it's from experience.)

 

​

 

(Can we guess the cause with this ambiguous code? Is there anyone who can do that? Personally, it's a great computer high moisture content, so if you find the cause with this simple error code, it's either a combination! A fortune teller! Or a liar! With a lot of experience, you can picture the cause of a defect in a high probability order with the error code + parts configuration, but I'm not here to shop at a computer repair shop, so I don't have to take it in an inaccurate state (I haven't even checked it).

 

​

 

​

 

​

 

​

 

If you take a picture and guess it well with a high probability, it will be lurking... It's better to make your own hypotheses from experience and cross-check them in order.

 

​

 

​

 

​

 

​

 

​

 

 

This stop code is KERNEL_SECURITY_CHECK_FAILURE

 

​

 

​

 

​

 

The above computer is believed to be caused by a bad memory connection. Two memory devices were plugged in, but the contact point was not good because the memory slot was old. Even if I tested it by changing multiple memories, the computer stopped when I plugged it into slot 1. There is a way to save the contact point by using gunpowder drugs such as contact reinvigorant (I don't use gunpowder as much as possible. If you spray contact reinvigorant, I recommend it to use it outdoors with good ventilation!)

 

​

 

​

 

​

 

It was the same with old computers and game consoles (game packs), but there are cases where metal friction occurs and contact points are revived in the process of removing and plugging the memory several times. It is thought that the surface of the contact pins inside the RAM slot is broken, so it is a symptom of poor memory connection due to deformation (rust, oxidation) of the metal's surface. => In this case, the computer user should also know how to reseat the memory, because long use of the computer can tell if it has been fixed. => I also told you how to install the memory.

 

​

 

​

 

​

 

If you continue to experience the same issue, you can change compatible memory and it's difficult for 2GB => 4GB to personally replace the board, so you can try spraying contact resorbant and physically cleaning the RAM slot. => The best option is to buy a new computer.